Moissanite Wholesale Prices: What Each Size and Grade Costs

Table of Contents

Quick answer: Loose moissanite wholesales from a few cents for 1mm melee to roughly US$25–60 for a 10mm DEF stone, at quantities of 100–1,000 pieces. A 6.5mm “one carat” stone typically lands between US$4 and US$12. Anything far outside those bands is either a different grade, a different material, or a quote that has moved cost somewhere else.

Moissanite of Mumtaz Exports

Indicative Price Ranges by Size

The ranges below assume round brilliant, DEF colour, VVS clarity, calibrated, at 100–1,000 pieces. They are market-indicative bands for planning, not a quotation — freight, plating and packaging are separate.

Size (mm)DEW (approx ct)Unit price at 100–1,000 pcsPrice driver
1.0–1.30.004–0.008US$0.02–0.08Volume; melee is sorted by sieve
1.50.012US$0.04–0.12Sorting accuracy matters more than price
2.00.03US$0.06–0.20Tennis chain and band volume
2.50.06US$0.10–0.30Calibration drives rejects
3.00.10US$0.18–0.50Most common side-stone size
4.00.23US$0.45–1.40Cut quality becomes visible
5.00.46US$1.10–3.20Earring pairs need colour matching
6.51.00US$4–12The benchmark “one carat” stone
7.51.54US$6–18Larger rough, lower yield
8.01.86US$10–28Men’s rings, pendants
10.03.64US$25–60Yield and cutting time dominate
Bands move with rough supply. Treat them as a sanity check on quotes, not as a price list.

The Four Factors That Move the Number

  • Colour grade. DEF is the reference. GH cuts 15–30% off the price and is where most private-label volume sits.
  • Cut quality. Precision cutting with a sharp girdle and correct crown angle adds cost and is the difference between “bright” and “glassy”.
  • Calibration. ±0.02mm costs more than ±0.10mm. If you set pavé or channel, this is not optional — off-size stones stall a line.
  • Quantity and mix. Price steps at roughly 100, 500 and 1,000 pieces per size. Mixed-size orders lose part of the discount.

Why the Cheapest Quote Usually Costs More

A quote 30% below the band above is almost always saving money in one of four places: looser calibration, inconsistent colour between bags, lower clarity than stated, or a longer lead time that forces you to carry more stock. Compare the four together, then add freight, duty, plating and defect rate.

Line itemExampleWhat to watch
Unit priceUS$6.50 per 6.5mm stoneConfirm the grade behind the number
Calibration±0.05mm instead of ±0.02mmCheaper quote, higher setting reject rate
FreightUS$0.20–0.60 per piece at 1,000 pcsAir vs sea changes both cost and lead time
Duty and VATCountry-specificLanded cost can be 15–30% above FOB
Defect allowance2–5% of orderA 5% reject rate wipes out a 5% price saving
Build this sheet once and reuse it for every supplier you compare.

For a single-size deep dive, the one-carat moissanite cost breakdown covers grade-by-grade pricing; for what documentation should accompany the goods, see GRA certificates explained. Current loose-stone availability is listed under calibrated loose moissanite.

How to Ask for a Quote That Can Be Compared

  • Give size in mm with tolerance, not carat.
  • State colour and clarity as grades, and ask for the rejection rule.
  • Ask for price at 100 / 500 / 1,000 pcs in the same message.
  • Ask for lead time at your quantity, not the stock-size lead time.
  • Ask whether the price includes sorting, calibration, and packing.

Landed Cost: A Worked Example

Unit price is the start of the calculation, not the end. Here is the same 100-piece order priced twice — once on FOB, once landed.

LineAmountNote
Goods, FOBUS$650100 × 6.5mm at US$6.50
Freight, airUS$45≈US$0.45 per piece at this volume
Duty and import VAT≈US$60Depends on destination and HS code
Packing and labelsUS$25Sealed bags, lot labels
Defect allowance, 3%US$21Stones rejected at incoming QC
Landed total≈US$801≈US$8.01 per stone
A 5% FOB saving is worth less than a 3% defect rate. Compare landed cost, then compare grades.

Negotiation Levers Other Than Price

  • Payment terms. A 30/70 split against documents is often easier for a factory to give than a lower unit price.
  • Mixed containers. Combining sizes into one shipment cuts freight per piece without touching the quote.
  • Stock versus custom. Committing to stock sizes gains 5–10% faster than asking for a custom cut at the same price.
  • Lead-time flexibility. Accepting a two-week window lets the factory batch your order with others.
  • Packaging and certification. Batch sheets instead of individual cards, and bulk bags instead of retail packs, are real savings.

If you are still at the specification stage, the moissanite buying guide covers the grades and tolerances that make these negotiations concrete rather than rhetorical.

Frequently Asked Questions

Why is moissanite so much cheaper than diamond?

It is grown, not mined. Silicon carbide can be produced in weeks at a controlled cost, and supply scales with demand. A 6.5mm stone costs a few dollars to make; a comparable natural diamond is priced by scarcity.

Is a US$4 stone worse than a US$12 stone?

At the same size, the difference is usually colour consistency, cut precision, and calibration. For a solitaire either will look fine; for pavé or a matched pair, the cheaper stone shows.

Do prices include certificates?

No. Per-stone GRA cards add cost and lead time; a batch sheet covering the lot is the normal solution for volume. See what a GRA card actually proves.

What quantity gets the best price?

Discounts usually step at 100, 500 and 1,000 pieces per size. Above 1,000 the curve flattens; at that point negotiation moves to payment terms and lead time instead of unit price.

Can I get a sample before a bulk order?

Yes, and you should. Order 20–50 pieces in the size you will run and put a few through setting, polishing and plating before you commit. Sampling cost is trivial against a wrong production run.

Related reading: How Much Is 1 Carat Moissanite Diamond?, Is Moissanite Worth Buying! The Questions You Want T, and All You Need to Know Before Buying Moissanite Stone.